Xiaomi Mi Max 3 (M1804E4A) Firehose File [No Need Auth]

https://www.gsmfirmware.net/2020/06/xiaomi-mi-max-3-firehose-file.html



What Is a Firehose File?
Firehose File is a programmer or loader file of GSM third-party programs (QCfire/Miracle Box) that allows bypassing the secure boot of Qualcomm-based devices. The firehose file enables the host computer to send commands to write to the EMMC or UFS storage chips. And the GSM tools use firehose loader files to flash, unlock and break Qualcomm-based devices. Such as the Xiaomi Mi Max 3 Qualcomm SDM636 Snapdragon 636 (14 nm).

Firehose files are also commonly known as programmer and loader files. A programmer prepares this file to upgrade the software of a particular device through a computer, this file we can also use manually in official flash tools, and professional (GSM ) programs and this file is known as a loader file in GSM programs/tools.

You can manually flash this file using the "EMMCDL" program file without the use of any professional tools. EMMCDL is a command-line utility that allows all kinds of manipulation in EDL format using the Sahara/Firehose protocol and the "programmer" file related to the device.

Example of Flashing a partition file using an EMMCDL program file.

emmcdl -p COM6 -f prog_emmc_firehose_Sdm660_ddr.elf -b system system.img

What Are the Advantages of the Xiaomi Mi Max 3 (M1804E4A) Firehose File?
If you want to flash or unlock your Xiaomi device, you need a Xiaomi authorized account, and you cannot flash or unlock your device without an authorized account. In this case, the firehose file allows you to flash and unlock your device (Mi Account and FRP Lock), bypassing the protection of the Xiaomi authorized account.
  • Flash stock ROM/firmware without a Xiaomi authorized account.
  • Upgrade or upgrade the mobile OS without Xiaomi authorized account.
  • Unlock FRP account without Xiaomi authorized account.
  • Unlock Mi account lock without Xiaomi authorized account.
  • Unlock Network Lock without an authorized Xiaomi account.

How to Load the Custom Firehose (Loader) File in the QCFire Program?
  1. First, launch the UMT QCFire program on your computer.
  2. When the QCFire program runs, uncheck the AutoLoader option in the Boot Options.
  3. Click on the three dots, Then find and select the Custom Firehose loader file (If the loader file does not appear, choose the type of all loaders).
  4. Once you have selected the loader file, the custom firehose (loader) file has been successfully loaded into the QCFire program.
  5. If you now unlock your device with the QCFire program or do any task, the QCFire program will use a custom loader/programmer file.
When the custom loader file is successfully loaded into the QCFire program, the path to that file appears in the QCFire address bar.
How to Flash the Xiaomi Mi Max 3 Device Using the Firehose File?
  1. First, download the desired Firehose file from the download link below.
  2. Then download the stock ROM/firmware file of the model you want to flash.
  3. Then replace this patched FireHose file with a loader file inside the Stock ROM/firmware.
  4. Download and install the Xiaomi Mi Flash Tool.
  5. Boot your device into EDL mode and connect it to the computer. (Make sure your laptop/computer has Xiaomi USB drivers installed)
  6. Launch the MI Flash tool, click the Select button, and locate the firmware file that you replaced with the Firehose file and select it.
  7. Now click on the flash button, as soon as the flashing process is complete, you will see the success message in MI Flash tool.
How to Unlock Mi Account and FRP Lock of Xiaomi Mi Max 3 Device Using Firehose File?
  1. Download and install the USB driver for the Xiaomi Mi Max 3 device.
  2. Run the QCFire program.
  3. Boot your device into Emergency Download Mode (EDL) and connect it to the computer.
  4. Now load the Xiaomi Mi Max 3 custom firehose file in QCFire Tool.
  5. Drop down the list and select the Xiaomi brand and choose your model.
  6. Now click on the MI Account or FRP command button. For example, if you want to reset the FRP, click the Reset FRP button, and if you want to delete the MI account, click the Remove or Disable MI Account button.
  7. This will be done in seconds, and you will see a successful informational message in the QCFire program.

The Screenshots of the Xiaomi Mi Max 3 (M1804E4A) FireHose File.

https://www.gsmfirmware.net/2020/06/xiaomi-mi-max-3-firehose-file.html

https://www.gsmfirmware.net/2020/06/xiaomi-mi-max-3-firehose-file.html


What Is the Content of Xiaomi Mi Max 3 (M1804E4A) FireHose Files?
-Xiaomi Mi Max 3 (M1804E4A) Firehose File [No Need Auth]
prog_emmc_firehose_Sdm660_ddr.elf

What Are the Details of the Xiaomi Mi Max 3 (M1804E4A) FireHose File?
You can find additional information about this file in the table below. And if you believe there's something wrong with the information in this post, feel free to let us know at our email address [email protected] or in the comments section below. We will be grateful to you for that.

Name Data
File Loader/Programmer
Type .ELF
Size 227.18 KB
Date Tuesday, June 23, 2020
Visits
...
Downloads ...
Price Free
Developer Third-Party
Category Firehose
Requirement Any (GSM) Qualcomm supported tools/programs.
Password www.gsmfirmware.net


Download Link for Xiaomi Mi Max 3 (M1804E4A) FireHose File.

  • Xiaomi Mi Max 3 (M1804E4A) Firehose File [No Need Auth].rar


The default password for compressed files is "www.gsmfirmware.net".

Post a Comment

1 Comments